Sinopec M0006 Special Cutting Oil is used in cooling down and lubrication during several metal and non-metal cutting and grinding.

• Low viscosity and good flowability, outstanding cooling and removing capacity.
• Excellent performance in lubricating.

SINOPEC M0252 Electrical Discharge Machining Oil is used for discharge machines working by penetration.

• Safety and security environment protection
• Colorless and Low odor

It is used in the forming operation of auto parts for lubricating, cooling and preventing rust etc.

• Good cleaning performance.
• Easy to be clean away.

Manufactured from a highly refined mineral oil, and various functional additives, with good lubricating performance, it is suitable for lubricating in the stainless steel wire drawing, etc.

• Outstanding extreme pressure performance resulting in extended mould life.

Adopts quality mineral base oil which is refined especially and then is subject to hydrogen desulfurization, denitrification, dearomatization and colloid removal.

• Low sulfur, low aromatic hydrocarbon, high flash point, low odor, high use safety and no harm to operator and environment.

SINOPEC M1087 Cutting Fluid is a multi-function emulsion recommended for heavy duty machining of ferrous metal and non-ferrous metal.

• Good anti-corrosion capability, resulting in lower reject rate and decreasing maintenance cost related to corrosion problems of non-forrous metal.

Suitable for silicon steel sheets lubrication and anti-rust.

• Good lubrication performance.
• Free cleaning, direct assembly.

Formulated for wire ropes with refined mineral base oils and extreme pressure additives, rust and oxidation inhibitors.

• Good extreme pressure and antiwear performance to protect the wear between wire rope and pulley to prolongs the service life.

Based on refined mineral oil, added various additives such as high temperature antioxidant, cold reminder agent, brightener, applicable to the alloy steels.

• Moderately accelerated quenching characteristics: Fast cooling rate in initial stage of quenching, good hardening capacity.

Based on secondary hydro refining mineral oil, added various functional additives, applicable to small deformation of carburized steel, bearing steel.

• Excellent oxidation resistance and thermal stability: Long lifetime, elimination for waste due to quench oil degradation.